 |
The SNAP-UP1-D64 controller/brain is a programmable I/O and communications processor. It can be used as a rack-mounted controller or as an I/O unit in a larger control system based on a more powerful Opto 22 controller, such as the SNAP-PAC-S1.
Used as a rack-mounted controller, the SNAP-UP1-D64 is programmed using the legacy ioProject Basic software suite, which is included in the purchase price. The newer PAC Project software suite was designed for SNAP PAC controllers but also offers limited support for SNAP Ultimate I/O.
|
SNAP-UP1-ADS, SNAP-UP1-D64, and SNAP-UP1-M64
|
Power Requirements |
5.0 VDC to 5.2 VDC at 1.2 A maximum (does not include module power requirements) |
|
Processor |
32-bit ColdFire 5407 |
Memory:
Total RAM:
Battery-backed RAM:
Flash EEPROM : |
16 MB
512 KB
8 MB
|
|
Backup battery |
CR2032, fixed (not user replaceable) |
|
Network Interface |
IEEE 802.3 network, 10Base-T and 100Base-TX |
|
Serial Port |
RS-232 |
|
Serial Data Rates |
Default is 19,200 baud; baud rate is soft-selectable from 150 to 115,200 baud. |
|
Maximum Ethernet Segment Length |
100 meters with Category 5 or superior UTP.
For 100 Mbps at this distance, use Category 5 or superior solid UTP. |
|
Jumpers (Internal) |
Boot to kernel/boot to loader
Reset to factory defaults
|
Temperature:
Operating
Storage |
0 °C to 70 °C
-40 °C to 85 °C |
|
Humidity |
0–95% humidity, non-condensing |
Courtesy of Opto22
|
