|
|
|
|
|
ULS-100 Series
FM-Approved Explosion-Proof
Enclosure may be ordered by
specifying ULS-100-EP.
|
ULS-10 Series
Will sense liquid to within
1/4Ë of tank bottom.
|
Ultrasonic Level Sensor
ULS-10 Series and ULS-100 Series
High Performance Models with Explosion-Proof Housings
• 10 Amp Relay Output
• 115/230 VAC 12 VDC or 24 VDC Input
• High Gain
• No Calibration Necessary
• Temperatures to 300°F (149°C)
• Lengths to 99 inches (251.5 cm)
The ULS-100 Series features our high performance sensor probe for handling liquid temperature to 300°F (149°C) and pressure to 1000 psi. Explosion-proof and water-tight, cast aluminum enclosures are standard; FM Approved explosion-proof enclosures are also available.
The ULS-10 Series features a Tip Gap probe design for closer tank bottom access.The miniaturized, encapsulated electronic control unit may be supplied for remote mounting, or directly mounted on sensor in an explosion-proof, NEMA enclosure.FM-Approved, explosion-proof enclosures are also available.
Specifications
|
Input Power |
115/230 VAC, 50/60 Hz; or 12/24 VDC |
|
Gain |
|
|
ULS-10 Series |
500:1 |
|
ULS-100 Series |
1000:1 |
|
Output |
|
|
ULS-10 Series |
10 Amp DPDT Relay, or 2-Wire, 4mA-Dry, 20mA-Wet (9-36 VDC) |
|
ULS-100 Series |
10 Amp DPDT Relay |
|
Delay (On) |
0.5 Seconds |
|
Repeatability |
2mm, Typical |
|
Housing |
NEMA 4/NEMA 7 Watertight, Explosion Proof Enclosure,Epoxy Coated Cast Aluminum Class I, Group C & D;Class II, Group E, F, & G; and Class III, Division 1 & 2. |
|
Operating Temperature |
|
|
Sensor |
|
|
ULS-10 Series |
-40°F to +300°F (-40°C to +149°C) |
|
ULS-100 Series |
-40°F to +300°F (-40°C to +149°C) |
|
Electronics |
-20°F to +170°F (-29°C to 77°C) |
|
Pressure, PSIG, Max. |
1000 @ 250°F |
|
|
|
|
|
Remote
Electronics
|
ULS-10
Sensor Probe
|
ULS-100
Sensor Probe
|
Courtesy of Gemsensors
|
