GS is a series of precision regulators, designed for rapid relief of overpressure and a high flow rate.

They feature identical and opposing regulation valves on the inlet and outlet sides. This enables the regulator to behave symmetrically – precise regulation with a high rate of flow both in and out.

The pressure setting is virtually insensitive to changes in the upstream pressure, which guarantees accuracy even when the mains pressure fluctuates considerably.

A slight escape of air is required for correct operation of the regulator – it must not be considered a defect.

The regulator can be fixed using the through holes in the body or a bracket accessory.

The body has a 1/8” pressure gauge fitting.

GS regulators are suitable for applications requiring god accuracy in maintaining the pressure and a certain sensitivity in relieving pressure peaks, e.g. to supply low-friction cylinders, reel tensioners and coil winders.

Two sizes of compressed air fitting are available: 1/8”and ¼”. Three different setting ranges are available: 0÷2 bar, 0÷4 bar and 0÷8 bar.

Courtesy of  Metal Work