-DIN W48×H24mm
-Widen and various selections with MT4Y and MT4W Series
-Maximized advantages with multi-output options and functions

▷ Multi-measuring input specifications
DC VOLT METER : 50VDC / 10VDC / 5VDC / 1VDC / 250mVDC / 50mVDC
AC VOLT METER : 250VAC / 125VAC / 50VAC / 25VAC / 5VAC / 2.5VAC
DC AMPERE METER : 500mADC / 200mADC / 50mADC / 4-20mADC / 5mADC / 2mADC
AC AMPERE METER : 5AAC / 2.5AAC / 500mAAC / 250mAAC / 100mAAC / 50mAAC
▷ Universal power supply : 12-24VDC / 12-24VAC 50/60Hz
▷ High resolution of 1/12000
▷ Max. display range : 4 digits (-1999 ~ 9999)
▷ LCD Display (Selectable among Red, Green and Orange)
▷ Small size with multi-input functions (W48×H24×L83mm)
▷ Various option outputs
: Relay contact output, NPN/PNP open collector output, 4-20mADC transmission output, RS485 communication output (Modbus type)
▷ Various comparative output mode
: HI, LO, HL, HL-G output mode with independent Hysteresis functions is included for each output mode (Relay contact output, NPN/PNP open collector output)
▷ IP 66 protection rating for front panel (IEC standard)

▷ Various functions
- Display functions
ㆍ Standard value display function : Display measuring input value as standard value for terminal.
ㆍ Prescale function : Set and display scale value within display range for measuring input value.
- Gradient correction function : Correct and display the gradient of input value, standard display value or prescale value within measuring input range.
- Error correction function : Correct error of display value for measuring input.
- AC frequency measuring function (Display only)
: Measure input signal frequency in AC input type (0.1㎐ ~ 9999㎑)
- Display cycle delay function
: It is enable to read display value stably by delaying display cycle even when the measuring input value is fluctuating.
- Peak value monitoring function
: Monitor High Peak and Low Peak of current display value and display the monitoring value.
- Lock setting function : It is to set the enable or disable of each parameter.
- Error display function
: It is to display when measuring input is exceeded the max./min. allowable input, display value is exceeded the max./min. display range, input frequency is exceeded the max. display range and zero adjustment range.

Courtesy of Autonics