Korenix is pleased to announce the launch of Ethernet-based block I/O modules  JetI/O 6500

30-Jan-2008

Korenix is pleased to announce the launch of Ethernet-based block I/O modules — JetI/O 6500

 

Korenix is pleased to announce the launch of Ethernet-based block I/O modules — JetI/O 6500, which is a series of Ethernet-based block I/O modules for distributive monitoring and controls. The block I/O modules feature built-in RSIC-based processor with MAC, and capable of performing analog I/O, digital I/O, and temperature measurement in an Ethernet network with Modus/TCP protocol at LAN, intranet or Internet.

JetI/O 6500 module can simultaneously communicate with an Ethernet network for configuration (HTTP, Telnet, Windows-based utility) and real-time I/O data collection or control. (Modbus/TCP Server), OPC server for Modbus/TCP is also provided for user easily integrating the JetI/O 6500 with any OPC Modbus/TCP client enabled software, e.g., 3rd party HMI/SCADA package.

JetI/O 6500 Product Highlight

1. Intelligent Ethernet Block I/O Server
2. Complete solution with multiple channels Analog Input/Output, Digital Input/Output and temperature measurement (Thermocouple, RTD) features
3. Accurate measurements with cold junction compensation
4. Supports PT100, Ni120 RTD and NTC Thermistor
5. Active alarm for High/Low Voltage/Current/Temperature
6. Intelligent Conditions&Go (If-Then) logic rules for DI/DO
7. Support OPC Server Driver
8. Windows Utiltity, OPC Server Utility, Modbus/TCP protocol, SNMP and Web management
9. Built-in watchdog timer and real-time clock
10. Din-Rail Mount with Robust Aluminum case and IP31 protection

The JetI/O 6500 software features are following

1. Network Protocols: IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server
2. Configuration: Windows Utility, Web browser, SNMP, DHCP Client, TFTP Server for firmware update
3. Windows Utility: Block I/O Utility, Device Fider Utility, OPC Server Utility
4. OPC Server: OPC Server driver for Modbus/TCP
5. Logic Condition&Go Rules: Conditions of the DI/Counter values, Actions include DO/Pulse, Counter and Trap
6. Active Alarm: High-/Low- Voltage/Current/Temperature alarms
7. SNMP: MIB-II: System, SNMP Trap and Private MIB
8. Program: C++ Example code by optional

 

 

Courtesy of Konerix